MTS Technik Sport Series Coilovers - 2011-2019 Volkswagen Beetle Cabriolet (5C7/5C8) MTSGWVW36-S
MTS Technik Sport Series Coilovers - 2011-2019 Volkswagen Beetle Cabriolet (5C7/5C8) MTSGWVW36-S

*Product images may not represent the actual SKU.

MTS Technik

SKU: MTSGWVW36-S

MTS Technik Stance Series Coilovers for 2011-2019 Volkswagen Beetle Cabriolet (5C7/5C8)

$737.00
In Stock
Fitment confirmation is based on the vehicle's year, make, and model only. Please verify fitment by reviewing full product description which may include notes and more specific information.

Check if this fits your vehicle

Select a Vehicle
Fitment confirmation is based on the vehicle's year, make, and model only. Please verify fitment by reviewing full product description which may include notes and more specific information.

Fits your vehicle

Change Vehicle
Fitment confirmation is based on the vehicle's year, make, and model only. Please verify fitment by reviewing full product description which may include notes and more specific information.

Does not fit your vehicle

Change Vehicle

Authorized Retailer
100% Authorized Retailer.
Free Shipping
Orders $250+ ship for free.*
Best Price Guarantee
Lowest price on all products.
0% APR Financing
Buy now, pay later.

MTS Technik Coilover Suspension - the perfect choice for drivers who appreciate the flexibility and the ability to adjust the suspension altitudes depending on your preference and road conditions. Stiffening of the suspension makes the car better to drive, more predictable and more secure.

Optimum alignment of the MTS Technik coilover suspension components causes recognition of the growing number of users. Large rims in the summer, smaller in the winter - thanks to MTS Technik coilover kits You can adjust the ride height to Your needs.

MTS Technik coilover suspensions are covered by a 2-year warranty with no mileage limit.

MTS Technik Stance Series Features:

  • High quality confirmed by a 2-year warranty without a mileage limit.
  • Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
  • The use of twin-tube technology guarantees stable shock absorber performance.
  • Pressurized gas presses the hydraulic fluid, eliminating the 'foaming' effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
  • Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
  • Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
  • Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
  • Coilover springs made by Eibach, the world leader in the sport springs industry.

Product Notes

  • When the adjustable spring seat is set too low according the catalogue, all guarantuees will be withdrawn.
  • Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
  • If the vehicle is equipped with the AMR System (Audi Magnetic Ride) - the system has to be deactivated. Suitable drivers are available only on request!
  • If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
  • During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
  • In some cases it might be necessary to dismount the rear adjustment to achieve the maximum lowering.
  • Rear thread adjustment block is mounted on the top.
  • Only suitable for multilink suspension.
Part Number MTSGWVW36-S
Part Name MTS Technik Stance Series Coilovers
Vehicle 2011-2019 Volkswagen Beetle Cabriolet
Engine 1.2TSI / 1.2TSI 16V / 1.4TSI / 2.0TSI / 2.5 / 1.6TDI / 2.0TDI
Chassis Code 5C7/5C8
Lowering Front Axle 25 - 50 mm
Lowering Rear Axle 25 - 50 mm
Max Axle Load Front 1000 - 1090 kg
Max Axle Load Rear 780 kg
Camber Plates Not Included
Additional Information
  • 2011 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2012 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2013 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2014 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2015 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2016 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2017 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2018 Volkswagen Beetle Cabriolet (5C7/5C8)
  • 2019 Volkswagen Beetle Cabriolet (5C7/5C8)

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

On Sale
Stanceparts Universal Air Cup Kit - Front & Rear SP-3004

Stanceparts

Stanceparts Universal Air Cup Kit - Front & Rear
$1,099.00 $1,299.00
On Sale
BC Racing Coilover Spring (Linear) - 62mm ID
On Sale
Swift Springs Metric Coilover Springs - ID 65mm, 4" Length
On Sale
Swift Springs Metric Coilover Springs - ID 65mm, 5" Length
On Sale
Powertune Digital Dash PTD-DASH

Powertune Digital

Powertune Digital Dash
$549.00 $599.00
326POWER Charabane Coilover Springs - ID63 H100 326-ID63-H100-06K-GRN
On Sale
Stanceparts Universal Air Cup Kit - Front SP-3002
326POWER Charabane Coilover Springs - ID63 H80
On Sale
Swift Springs Metric Coilover Springs - ID 65mm, 6" Length