*Product images may not represent the actual SKU.
SPL Parts
SKU: SPL RUA F8X
SPL Parts Rear Upper Camber Arms - 2014-2023 BMW M3 (F80)
Check if this fits your vehicle
Fits your vehicle
Does not fit your vehicle
*Product images may not represent the actual SKU.
SPL Parts
SKU: SPL RUA F8X
Check if this fits your vehicle
Fits your vehicle
Does not fit your vehicle
SPL Parts adjustable Rear Upper Arms (RUA) for the 2014-2023 BMW M3 (F80) are an absolute necessity to maintain proper rear camber and reduce tire wear on the street and track. The stock BMW setup has an aggressive camber curve through bump travel, which is very apparent on lowered cars. Excess negative camber causes premature tire wear on the inside edge, and reduced traction on acceleration while too little camber will limit rear grip while cornering. Our Rear Upper Arms provide a wide adjustment range for precise rear camber alignment that is easily optimized for street or track driving while eliminating bushing deflection with smooth articulating Teflon lined rod ends in place of the soft factory rubber bushings. Our kit replaces the factory links commonly referred to as the rear wishbone and rear guide links.
SPL Parts Rear Upper Arms are gundrilled 2024 Aluminum links to reduce weight, then are Black Anodized to prevent corrosion and provide a durable finish. Our exclusive 360 degree 6061-T6 Aluminum Rotating Clamp design allows for quick, precise adjustment. Our Clamps tightened down with Blue Anodized Titanium Socket Head Cap Screws gives easy access to adjust camber settings, shaving off even more unsprung weight without compromising strength. Our Rear Upper Links provide superior performance, durability, and ease of adjustment. Long gone are the days of fumbling with wrenches to tighten jam nuts while trying to trying to keep your bearings orientated correctly.
FK Spherical Bearings and Rod Ends are manufactured in Connecticut and utilize a Teflon liner to provide quiet operation, lower friction, smooth articulation, and eliminates bushing deflection under load. The liner is also self-lubricating and self-cleaning, offering robust reliability for street and track use. The PTFE liner is chemically bonded to the inner diameter of the race, and offers a very high load carrying capacity that has greatly increased dynamic wear characteristics. The operating temperature of the liner ranges from -65ºto 325ºF, offering robust reliability.
Sold as a complete kit for one car (4 total arms). Made in the USA.
Part Number | SPL RUA F8X |
Part Name | Rear Upper Camber Arms |
UPC | 887753910738 |
Vehicle | 2014-2023 BMW M3 (F80) |
SPL Parts Inc. suspension products are warranted to be free of defects in material and workmanship for ten (10) years or 100,000 miles from the date of purchase.
If a product fails to meet specifications, SPL PARTS INC. will, at its election, repair, replace, or make appropriate adjustment, if SPL PARTS INC. determines to its satisfaction that the product is defective in material or workmanship, i.e. contains a defect arising out of the manufacture of the product and not a defect caused by other circumstances, including, but not limited to accident, misuse, abuse, unforeseeable use, neglect, alteration, improper installation, improper adjustment, improper repair, corrosion, or failure caused by other equipment or interaction with other equipment. Using any SPL PARTS INC. arm as a tie/strap down point (ie. for a dyno session or transport) will void the warranty.
SPL PARTS INC. is not responsible for labor charges, removal charges, installation, or other incidental or consequential costs. In no event shall the liability of SPL PARTS INC. exceed the purchase price of the product.
SPL PARTS INC. makes no other warranties, either expressed or implied, including limitation warranties as to merchantability or fitness for a particular purpose. SPL PARTS INC. shall not be liable for, and buyer assumes all risk of, any advice or failure to provide advice by SPL PARTS INC. to buyer regarding the product or use and installation of product. SPL PARTS INC. shall not be liable for any special, incidental or consequential damages.
If the purchaser of the product shall fail to pay when due any portion of the purchase price, or fail to meet any terms required under contract agreed on at time of purchase, all warranties and remedies granted can be terminated.
Proof of purchase is required for all warranty claims. All warranty claims must be returned to SPL PARTS INC. for inspection, for the claim to be processed. Customers are responsible for all shipping costs.
Please contact SPL Parts by phone or email regarding any warranties.
Air Lift Performance
Air Lift Performance
Air Lift Performance
Air Lift Performance
Air Lift Performance
Air Lift Performance
Enter your email and password to access your account.
We will send you an email to reset your password.
Please fill in the information below to create your account.
Select your vehicle below to see compatible products.
Reset vehicle
Is your vehicle not listed? Let us know.
Is your vehicle not listed? Let us know.
Enter your email and password to access your account.
We will send you an email to reset your password.
Please fill in the information below to create your account.